SatoshiHiramatsu

Circular Cutting Blade Simulator [ACSEL 5100]

This simulator lets the worker experience the difference of durability of normal work gloves and cut resistant gloves.
Circular blade slide down the guide slope and cut the glove.

Have you ever had this type of experience before?

When the I replaced a circular blade. I got your hand cut.

I got a deep cut because i did not wear cut resistant gloves.

Device Overview

Outside dimension	W 800 × D 200 × H 360（mm）
Weight	about 20kg

Low Oxygen Simulator [ACSEL 5080]

This simulator shows you how a hypoxic environment occures by using carbon dioxide from dry ice.

Device Overview

Have you ever had this type of experience before?

An internal combustion engine running an enclosed area without enough ventilatioin can lead to a shortage of oxygen.

Voltage	AC 100V
Outside dimension	W 920 × D 500 × H450（mm）
Weight	about 30kg

Lifting Weight Simulator [ ACSEL 5130]

This imulator allows you experience the mental miscalculation of lifting heavy items.
Using three types of objects which are all the same weight but of different volume.
You also can learn how the feel of the weight varies by how you lift it.

Have you ever had this type of experience before?

I injured my back as lifted up a heaby box without due care. I thought the box was light but actually it was much heacier than I expected.

Device Overview

Outside dimension	W 250 × D 250 × H300（mm）
Weight	about 10kg

Collision Impact Simulator [ACSEL 5160]

翻訳中　Translating now…

Device Overview

Voltage	AC 100V
Outside dimension	Monitor: W 700 x D 320 x H 1,700, Impact Device: W 1,000 x D 1,500 x H 1,600 (mm)
Weight	about 500kg

Dropping Impact Measurement Simulator [ACSEL 5150]

This simulator measures the impact when you fall from height.
Looking at the number readout of the impact, and you can imagine how serious it could be when you fall from height.

Device Overview

Voltage	AC 100V
Outside dimension	Control panel: W 800 × D 500 × H 1,250（mm） Main body: W 1,000 × D 600 × H310（mm）
Weight	Approx. 400kg
Note	Prepare a hoist crane, a sandbag or mannequin to drop, stage which drop sandbag from, and safety fence.

Industrial Safety Belt Simulator [ACSEL 5120]

This device lets the worker experience the shock of falling and how their body is compressed by the body belt type safety belt and the harness belt type.

Device Overview

Voltage	AC100V
Outside dimension	W 1,700 × D 1,000 × H2,645（mm）
Weight	Approx. 80kg

Hand Grinder Running and Collision Simulator [ACSEL 2080]

This simulator allows you to learn the danger of an unconrolled grinder when it is plugged in with its switch already turned on.
Also, you can experience the impact when a grinder hits a wall or som form of protuberance.

Device Overview

Voltage	AC100V
Outside dimension	W 730 × D 800 × H 1,760（mm）
Weight	Approx.100kg

Slinging Wire Accident Simulator [ACSEL 2070]

This simulator allows you to experience the danger of a workplace accident while operating a hoist and sling wire.
You can understand and observe the danger of jamming in incident by inserting an imitation hand or a thin bamboo stick.

Have you ever had this type of experience before?

I was about to jam mu finger between the cargo aond the sling wire during slinging work.

Device Overview

voltage	AC 100V
Outside dimension	W 1,200 × D 1,200 × H 2,300 (mm)
Weight	Approx. 450kg (With an empty drum.)
Note	Fill the drum with water before simulation. (About 220kg when full capacity.)

Chucking Jamming Accident Simulator [ACSEL 2060]

This simulator allows trainees to experience the risks of adjusting the chucking core center.
You can learn how the chucking power can crush finger badly if the correct method of using this kind of mechanism in not followed.

Have you ever had this type of experience before?

I touched pressurized equipment to set it back to its proper position, and my finger was about to get jammed between the equipment.

Device Overview

Air pressure	0.3MPa以上
Outside dimension	W900×D450×H1,670（mm）
Weight	about 120Kg

Coupler Remaining Pressure and Uncontrolled Hose Accident Simulator [ACSEL 2021]

This is advanced version of the “ACSEL 2020 Coupler Remaining Pressure Accident Simulator”.
You can see how the hose acts abnormally when there is remaining air in addition to the propelling coupler.

Have you ever had this type of experience before?

Air pressure remaining inside an air hose when disconnected causes the hose to thrash around wildly, almost resulting in injuray.

Device Overview

Air Pressure	0.5Mpa or less
Outside dimension	W760×D730×H1,340（mm）
Weight	about 120Kg

Have you ever had this type of experience before?

Device Overview

Device Overview

Have you ever had this type of experience before?

Have you ever had this type of experience before?

Device Overview

Device Overview

Device Overview

Device Overview

Device Overview

Have you ever had this type of experience before?

Device Overview

Have you ever had this type of experience before?

Device Overview

Have you ever had this type of experience before?

Device Overview

Accident Type